淑芬又痒了把腿张开在线视频-欧美一区二区国产精品-亚洲精品你懂的av在线-亚洲三级欧美三级日韩三级

APP下載
機會在手,求職信息實時掌握
    Alternate Text
    APP下載
    Alternate Text
    微信公眾號
    Alternate Text
    小程序
當前位置:首頁> 列表 >職位詳情
assembly process engineer裝配工藝工程師 (職位編號:kscq-009)
面議 3年以上 本科
  • 全勤獎
  • 節日福利
  • 不加班
  • 周末雙休
  • 領導好技能培訓崗位晉升
重慶科爾本施密特活塞有限公司 最近更新 3726人關注
職位描述
該職位還未進行加V認證,請仔細了解后再進行投遞!
職位描述:
job responsiblities:工作職責
continuous improvement of equipment & processes 設備&工藝持續改進
? analysis of equipment efficiencies by appropriate methods (statistical evaluation) and initiation of immediate actions in case of efficiency shortfalls 運用適當的方式分析設備效率(統計學評價)并在效率低下時立即采取改善行動。
? analysis of efficiency shortfalls to identify improvement opportunities, develop temporary and permanent corrective actions and actively support its implementation.分析效率低下原因,識別改善機會,制定臨時和永久性改善措施,并積極實施改進。
? monitor the effectiveness of the taken actions to develop and implement further improvement actions if needed
監控改善措施的有效性,在必要時做進一步改善。
manufacturing process control 制造過程控制
? develop and manage system for monitoring manufacturing process parameters 制定和管理制造過程參數的監控體系。
? determine attributive and variable process parameters to effectively control the manufacturing processes
定義各種工藝參數,并對制造過程進行有效監控。
? monitior internal and external quality data and support failure root cause analysis, development and implementation of actions to resolve quality shortfalls 監控內外部質量數據,支持質量缺陷的根本原因分析,制定改善措施解決質量缺陷。
? maintain manufacturing control plans 維修制造控制計劃。
industrial engineering 工業工程
? determines cycle times for the assigned area by applying industrial engineering methods 運用工業工程方法制定各自領域內的產品節拍。
? planning and implementation of technical changes on existing equipment 對現有設備實施技術改進
? develop specifications for machines, fixtures, tools and gauges to accomodate new or revised processes
為新工藝或改進工藝制定相關機器,工裝,模具和檢具的技術參數,
? supervise and manage the procurement, installation and commissioning of new or revised equipment
監督和管理新設備或改進設備的采購,安裝和調試。
? support collecting, consolidating and publishing key performance indicators for the assigned area
協助收集、整合和公布各自領域內的關鍵績效指標
qualifications: 任職要求
5years experience in assembly process, working in machining industry is preferred.
5年以上裝配工藝工作經驗,機加工行業優先考慮。
can use the cognex visual system is preferred.
會運用cognex 視覺系統者優先考慮;
can use the msa/spc/pfmea/cp/apqp/ppap quality tools.
會使用msa/spc/pfmea/cp/apqp/ppap 等質量工具;
good english listening, speaking, reading and writingabilities.
良好的英語聽說讀寫能力;
微信分享
聯系方式
注:聯系我時,請說是在涪陵人才網上看到的。
工作地點
地址:重慶江北區重慶
求職提示:用人單位發布虛假招聘信息,或以任何名義向求職者收取財物(如體檢費、置裝費、押金、服裝費、培訓費、身份證、畢業證等),均涉嫌違法,請求職者務必提高警惕。
top
投遞簡歷
馬上投遞
更多崗位等你來挑選   加入涪陵人才網,發現更好的自己
投遞簡歷
馬上投遞
提示
該職位僅支持官方網站投遞
關閉 去投遞

若您已有簡歷,可直接登錄登錄

  • 省份

    注:0表示面議
    獲取驗證碼
    保存并投遞
    會員中心 提示:訂單支付,立即生效
    天數: 0
    共計: 0
    支付方式:
    微信支付
    支付寶支付
    確認 取消